| Model: |
Z890 AORUS MASTER |
| CPU |
LGA1851 socket: Support for Intel® Core™ Ultra Processors L3 cache varies with CPU |
| Chipset |
Intel® Z890 Express Chipset |
| BIOS |
1 x 256 Mbit flash Use of licensed AMI UEFI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
| Operating System |
Support for Windows 11 64-bit |
| Form Factor |
ATX Form Factor; 30.5cm x 24.4cm |
| Memory |
Support for DDR5 9500(O.C) / 9466(O.C) / 9333(O.C) / 9200(O.C)/ 9066(O.C) / 8933(O.C) /8800(O.C) /8600(O.C) / 8400(O.C) /8266(O.C) / 8200(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400 / 6200 / 6000 / 5800 / 5600MT/s memory modules. 4 x DDR5 DIMM sockets supporting up to 256 GB (64 GB single DIMM capacity) of system memory // Dual channel memory architecture // Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) // Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules // Support for Extreme Memory // Profile (XMP) memory modules // Support CUDIMM memory module (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to “Memory Support List” for more information.) |
| Expansion Slots |
CPU: 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) // Chipset: 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) // 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x1 (PCIEX1) |
| Graphics |
Integrated Graphics Processor-Intel® HD Graphics support: – 2 x Intel® Thunderbolt™ 4 connectors (USB4® USB Type-C® ports), supporting DisplayPort and Thunderbolt™ video outputs // When a Thunderbolt™ monitor is installed, the maximum resolution supported is 5120×2880@60 Hz with 24 bpp (single display output). // When a USB4® USB Type-C® monitor is installed, the maximum resolution supported is 3840×2160@240 Hz (single display output). // – 1 x front HDMI port, supporting a maximum resolution of 1920×1080@30 H |
| Storage |
CPU: 1 x M.2 connector (Socket 3, M key, type 25110/22110/2580/2280 PCIe 5.0 x4/x2 SSD support) (M2A_CPU) – 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2B_CPU) – 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 5.0 x4/x2 SSD support) (M2D_CPU) // Chipset: 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB) – 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB) – 4 x SATA 6Gb/s connectors // RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices // RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices |
| USB |
CPU: 2 x Intel® Thunderbolt™ 4 (USB Type-C®) ports on the back panel // Chipset: 6 x USB 3.2 Gen 2 Type-A ports (red) on the back panel // Chipset+USB 3.2 Gen 2×2 Hub: 1 x USB Type-C® port with USB 3.2 Gen 2×2 support, available through the internal USB header // Chipset+2 USB 3.2 Gen 1 Hubs: 8 x USB 3.2 Gen 1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) // Chipset+2 USB 2.0 Hubs: 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) |
| Back Panel I/O Ports |
1 x Q-Flash Plus button // 1 x Clear CMOS button // 2 x Intel® Thunderbolt™ 4 connectors (USB Type-C® ports) // 6 x USB 3.2 Gen 2 Type-A ports (red) // 4 x USB 3.2 Gen 1 ports // 2 x USB 2.0/1.1 ports // 1 x RJ-45 port // 2 x antenna connectors (2T2R) // 2 x audio jacks // 1 x optical S/PDIF Out connector |
| Audio |
Realtek® ALC1220 CODEC The front panel line out jack supports DSD audio. // ESS ES9118 DAC chip: Support for DTS:X® Ultra // High Definition Audio // 2/4/5.1-channel // You can change the functionality of an audio jack using the audio software. To configure 5.1-channel audio, access the audio software for audio settings. // Support for S/PDIF Out |
| Internal I/O Connectors |
1 x 24-pin ATX main power connector // 2 x 8-pin ATX 12V power connectors // 1 x CPU fan header // 1 x CPU fan/water cooling pump header // 4 x system fan headers // 4 x system fan/water cooling pump headers // 4 x addressable RGB Gen2 LED strip headers // 1 x RGB LED strip header // 5 x M.2 Socket 3 connectors // 4 x SATA 6Gb/s connectors // 1 x front panel header // 1 x front panel audio header // 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support // 2 x USB 3.2 Gen 1 headers // 2 x USB 2.0/1.1 headers // 1 x noise detection header // 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module only) // 1 x HDMI port (Note) // 1 x power button // 1 x reset button // 1 x reset jumper // 1 x Clear CMOS jumper // 2 x temperature sensor headers Voltage Measurement Points (Note) Actual support may vary by CPU |
| Special Features |
Support for GIGABYTE Control Center (GCC): Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. // Support for Q-Flash // Support for Q-Flash Plus // Support for Smart Backup |
| Software Features |
Norton® Internet Security (OEM version) // LAN bandwidth management software |
| Ethernet |
Marvell® AQtion AQC113C 10GbE LAN chip (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps) |
| Wireless & Bluetooth |
Intel® Wi-Fi 7 BE200NGW – 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands // BLUETOOTH 5.4 – Support for 11be 320MHz wireless standard (Actual data rate may vary depending on environment and equipment.) |
| I/O Controller |
iTE® I/O Controller Chip |
| H/W Monitoring |
Voltage detection // Temperature detection // Fan speed detection // Water cooling flow rate detection // Fan fail warning // Fan speed control // Noise detection |
